SLICEWORX KP3S Pro S1 3D Printer 200x200x200 BV Linear Rails on ALL AXES


SLICEWORX KINGROON KP3S Pro S1 3D Printer 200x200x200 build volume with Linear Rails on X and Z axis.

Sliceworx KP3S Pro S1 is a cantilever-style 3D printer with linear guide rails on every Axis. Get 0.005 positioning accuracy even at high speeds on this printer.

Based on the Titan direct drive system with a 3:1 gear ratio, Kingroon KP3S Pro S1 is able to print multiple 3D printing materials, including commonly used PLA, flexible materials like TPU , hard materials like PETG and PC-CF and abrasive and strong filaments like ABS and Nylon PA-66 (enclosure needed and not included in the box)
   
Compared with the old version KP3S, KP3S Pro S1 has an increased print volume of 200*200*200mm, which further expands the printer's capability for your daily 3D printing tasks.
 
KP3S uses Marlin 2.0.x with TMC2225 stepper drivers due to which all axis on KP3S Pro operate super quietly with minimum interference.
 
With a built-in switching power supply, KP3S Pro S1 has a small footprint to build volume ratio. The footprint is just 8.5"x 11.5" which is almost the size of a common letter size sheet of paper.

Additional features like a 2.4 inch responsive Touchscreen, pre assembled wire harnesses, filament runout sensor and simple 6 screws assembly makes this a great printer for any beginner looking to take their first baby steps in 3d printing.

** This printer uses very generic non proprietary parts for the entire machine except for the sheet metal parts. All spare parts and consummables on this printer will be kept in stock in the SliceWorx store. **

Features:

  • Compact design but a decent print volume of 200*200*200mm.
  • Reliable titan direct extruder with 3:1 gear ratio.
  • Built-in switching power supply.
  • Resume printing when unexpected power failure or filament outage happens.
  • TMC2225 stepper driver ensures quiet printing.
  • Enhanced accuracy because of X and Z-axis linear guide rails.
  • Stable print bed operation with a large plate underneath that runs on wide rails.
  • 95% pre-assembled so it takes just 15 minutes of installation before 1st print.

    *SLICEWORX KP3S Pro S1 is exclusively available only on Sliceworx.com*
    **Please email us sales@sliceworx.com for Print farm deals (>6 units) on this printer and filaments**

$349.00 $399.00

SLICEWORX

3D Printers

85 In Stock

SLICEWORX KINGROON KP3S Pro S1 3D Printer 200x200x200 build volume with Linear Rails on X and Z axis.

Sliceworx KP3S Pro S1 is a cantilever-style 3D printer with linear guide rails on every Axis. Get 0.005 positioning accuracy even at high speeds on this printer.

Based on the Titan direct drive system with a 3:1 gear ratio, Kingroon KP3S Pro S1 is able to print multiple 3D printing materials, including commonly used PLA, flexible materials like TPU , hard materials like PETG and PC-CF and abrasive and strong filaments like ABS and Nylon PA-66 (enclosure needed and not included in the box)
   
Compared with the old version KP3S, KP3S Pro S1 has an increased print volume of 200*200*200mm, which further expands the printer's capability for your daily 3D printing tasks.
 
KP3S uses Marlin 2.0.x with TMC2225 stepper drivers due to which all axis on KP3S Pro operate super quietly with minimum interference.
 
With a built-in switching power supply, KP3S Pro S1 has a small footprint to build volume ratio. The footprint is just 8.5"x 11.5" which is almost the size of a common letter size sheet of paper.

Additional features like a 2.4 inch responsive Touchscreen, pre assembled wire harnesses, filament runout sensor and simple 6 screws assembly makes this a great printer for any beginner looking to take their first baby steps in 3d printing.

** This printer uses very generic non proprietary parts for the entire machine except for the sheet metal parts. All spare parts and consummables on this printer will be kept in stock in the SliceWorx store. **

Features:

  • Compact design but a decent print volume of 200*200*200mm.
  • Reliable titan direct extruder with 3:1 gear ratio.
  • Built-in switching power supply.
  • Resume printing when unexpected power failure or filament outage happens.
  • TMC2225 stepper driver ensures quiet printing.
  • Enhanced accuracy because of X and Z-axis linear guide rails.
  • Stable print bed operation with a large plate underneath that runs on wide rails.
  • 95% pre-assembled so it takes just 15 minutes of installation before 1st print.

    *SLICEWORX KP3S Pro S1 is exclusively available only on Sliceworx.com*
    **Please email us sales@sliceworx.com for Print farm deals (>6 units) on this printer and filaments**

Related Products