Dovov S2 3D Printer with Direct Drive Extruder 235x235x250mm


Dovov S2 3D Printer with Direct Drive Extruder, Precision Dual Z-Axis Motors, Silent Board and Carborundum Glass Platform, Print Size 235x235x250mm

  • Second-generation Silent Chip: The Dovov S2 Second-generation silent chip has stronger interference repulsion, more stable motion performance and silent printing operation. Operating noise is less than 50 dB. Thermal Runway protection is enabled by default on the mainboard.
  • Dual Z-axis Direct Drive: The Dual Z-axis drive improves printing accuracy by 15-30% on the vertical Z axis, reduces the load on the drive shafts, and improves the printing stability and service life of Dovov 3D printers.
  • Power Loss Resuming and Filament Sensor: Dovov S2 3D printer features power loss recovery function and filament Sensor for filament end detection. In case of accidental power loss, users can resume printing with just one click. Filament sensor can detect whether a strand of filament is inserted into the extruder. When short of Filament, it will automatically pause printing and issue a prompt signal. 
  • Carborundum Glass Platform: Good thermal stability and heating efficiency allow the model to maintain good adhesion on the platform, and after printing or cooling, it is easy to separate the 3D printed object from the build platform. The carborundum glass platform has high structural strength does not deform or warp in long-term use.
  • Installation-free& Foldable: Dovov S2 3D printer is fully installed, it only takes 1-2 minutes to unfold it and install the 4 screws before you can start your first print.
  •  In addition, 200 grams of filament, SD card and card reader are included in the package.

  • Printing Technology: FDM (Fused Deposition Modeling)
  • Extruder Type: Integrated direct drive extruder
  • Print Resolution: ± 0.1mm
  • Positioning Accuracy: X/Y 0.01mm Z 0.004mm
  • Nozzle Diameter: ø 0.4 mm (Replaceable to 0.2/0.3/0.6/0.8 mm nozzles)
  • Filament Dimensions: ø 1.75 mm
  • Support Filaments: PLA / ABS / PETG / TPU
  • Platform Material: PEI spring steel
  • Z-Axis: Dual Z-axis Direct Drive
  • Software: Cura, DOVOV Slicer, etc
  • Printing Speed: <150mm/s (recommended 50-70mm/s)
  • Build Volume(W x D x H): 9.25 x 9.25 x 9.84 inch/ 235 x 235 x 250mm
  • Heated bed Temperature: ≤120°C/ 248°F
  • Nozzle temperature: ≤260°C/ 500°F
  • Warranty and Support: 1 year Manufacturers warranty provided by Dovov

$249.00 $299.00

DOVOV

3D Printers

5 In Stock

Dovov S2 3D Printer with Direct Drive Extruder, Precision Dual Z-Axis Motors, Silent Board and Carborundum Glass Platform, Print Size 235x235x250mm

  • Second-generation Silent Chip: The Dovov S2 Second-generation silent chip has stronger interference repulsion, more stable motion performance and silent printing operation. Operating noise is less than 50 dB. Thermal Runway protection is enabled by default on the mainboard.
  • Dual Z-axis Direct Drive: The Dual Z-axis drive improves printing accuracy by 15-30% on the vertical Z axis, reduces the load on the drive shafts, and improves the printing stability and service life of Dovov 3D printers.
  • Power Loss Resuming and Filament Sensor: Dovov S2 3D printer features power loss recovery function and filament Sensor for filament end detection. In case of accidental power loss, users can resume printing with just one click. Filament sensor can detect whether a strand of filament is inserted into the extruder. When short of Filament, it will automatically pause printing and issue a prompt signal. 
  • Carborundum Glass Platform: Good thermal stability and heating efficiency allow the model to maintain good adhesion on the platform, and after printing or cooling, it is easy to separate the 3D printed object from the build platform. The carborundum glass platform has high structural strength does not deform or warp in long-term use.
  • Installation-free& Foldable: Dovov S2 3D printer is fully installed, it only takes 1-2 minutes to unfold it and install the 4 screws before you can start your first print.
  •  In addition, 200 grams of filament, SD card and card reader are included in the package.

  • Printing Technology: FDM (Fused Deposition Modeling)
  • Extruder Type: Integrated direct drive extruder
  • Print Resolution: ± 0.1mm
  • Positioning Accuracy: X/Y 0.01mm Z 0.004mm
  • Nozzle Diameter: ø 0.4 mm (Replaceable to 0.2/0.3/0.6/0.8 mm nozzles)
  • Filament Dimensions: ø 1.75 mm
  • Support Filaments: PLA / ABS / PETG / TPU
  • Platform Material: PEI spring steel
  • Z-Axis: Dual Z-axis Direct Drive
  • Software: Cura, DOVOV Slicer, etc
  • Printing Speed: <150mm/s (recommended 50-70mm/s)
  • Build Volume(W x D x H): 9.25 x 9.25 x 9.84 inch/ 235 x 235 x 250mm
  • Heated bed Temperature: ≤120°C/ 248°F
  • Nozzle temperature: ≤260°C/ 500°F
  • Warranty and Support: 1 year Manufacturers warranty provided by Dovov

Related Products