Bambulab Compatible PEI Textured Spring Steel Sheet 184x184mm for A1 Mini 3D Printer


Bambulab Compatible PEI Textured Spring Steel Sheet 184x184mm for A1 Mini 3D Printer

  • Versatile: Product is compatible with many Bambulab printer model  A1 Mini and Kingroon KP3/KP3S (180mm bed) models 

  • Material : Spring stainless steel 0.5mm thickness with 0.05mm coating PEI powder sprayed then dipped in high quality polymer based coating for power adhesion to the surface.The QR Code has been laser etched on this coated surface and will never come off.

  • Properties: Flexible, removable, and holds to the magnetic sticker very well. High strength and heat resistance.

  • Quality: The flexible surface can easily be applied to all Bambulab beds making it perfect for plug and play printing.

  • Use: Your prints in PLA and PETG adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. We strongly recommend to NOT print using ABS,PC and TPU on this surface. 

  • High Temp compatible: Since we have used high quality spring steel of 0.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.

  • To begin using this plate in your A1 Mini printer make sure you select ‘Textured PEI Plate’ in your Bambu slicer.

  • Compatible Printers : All Bambulab and Kingroon printers where the Heated Bed plate measures 184x184mm are compatible. Compatible with PLA/PETG filaments only
    **Not Compatible with ABS, TPU, PC,TPU and PU Derivatives like Flex PLA, STTPU. Printing with these materials can cause permanent bonding of the printed part with the coating material. 

Notes :

  1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable. 
  2. Do not print PC or PC CF or any PC blend filament on the surface. PC will permanently fuse with the build surface rendering it useless for any further prints. 
  3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate. 
  4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal. 

$29.99 $39.99

SLICEWORX

3D Printer Accessories

231 In Stock

Bambulab Compatible PEI Textured Spring Steel Sheet 184x184mm for A1 Mini 3D Printer

  • Versatile: Product is compatible with many Bambulab printer model  A1 Mini and Kingroon KP3/KP3S (180mm bed) models 

  • Material : Spring stainless steel 0.5mm thickness with 0.05mm coating PEI powder sprayed then dipped in high quality polymer based coating for power adhesion to the surface.The QR Code has been laser etched on this coated surface and will never come off.

  • Properties: Flexible, removable, and holds to the magnetic sticker very well. High strength and heat resistance.

  • Quality: The flexible surface can easily be applied to all Bambulab beds making it perfect for plug and play printing.

  • Use: Your prints in PLA and PETG adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. We strongly recommend to NOT print using ABS,PC and TPU on this surface. 

  • High Temp compatible: Since we have used high quality spring steel of 0.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.

  • To begin using this plate in your A1 Mini printer make sure you select ‘Textured PEI Plate’ in your Bambu slicer.

  • Compatible Printers : All Bambulab and Kingroon printers where the Heated Bed plate measures 184x184mm are compatible. Compatible with PLA/PETG filaments only
    **Not Compatible with ABS, TPU, PC,TPU and PU Derivatives like Flex PLA, STTPU. Printing with these materials can cause permanent bonding of the printed part with the coating material. 

Notes :

  1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable. 
  2. Do not print PC or PC CF or any PC blend filament on the surface. PC will permanently fuse with the build surface rendering it useless for any further prints. 
  3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate. 
  4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal. 

Related Products