SLICEWORX Flex Dipped Textured Spring Steel Sheet 192x186 mm for Prusa Mini 3D Printer

• Versatile: Product is compatible with Prusa Mini 3D Printer model  

• Material : Spring stainless steel 0.5mm thickness with 0.05mm coating PEI powder sprayed then dipped in high quality polymer based coating for power adhesion to the surface.Laser etched guidelines on the coated surface will never come off.
  
  

• Properties: Flexible, removable, and holds to the magnetic sticker very well. High strength and heat resistance.
  
  
• Quality: The flexible surface can easily be applied to all printer beds with magnetic sheets  making it perfect for plug and play printing.
  
  
• Use: Your prints in PLA and PETG adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. We strongly recommend to NOT print using ABS,PC and TPU on this surface. 
  
  
• High Temp compatible: Since we have used high quality spring steel of 0.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.
  
  
• Z Offset : To begin using this plate in your Prusa Mini printer make sure you set the correct Z offset in your settings. 

• Compatible Printers : All Bambulab and Kingroon printers where the Heated Bed plate measures 184x184mm are compatible. Compatible with PLA/PETG filaments only
  **Not Compatible with ABS, TPU, PC,TPU and PU Derivatives like Flex PLA, STTPU. Printing with these materials can cause permanent bonding of the printed part with the coating material. 

Notes :

1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable. 
2. Do not print PC or PC CF or any PC blend filament on the surface. PC will permanently fuse with the build surface rendering it useless for any further prints. 
3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate. 
4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal.