SLICEWORX Flex Dipped Plate Textured Spring Steel Sheet 254x235mm for Prusa MK3/MK4 Printers


SLICEWORX Flex Dipped Plate Textured Spring Steel Sheet 254x235mm for Prusa MK3/MK4 Printers 3D Printer

  • Versatile: Product is compatible with Prusa MK3/MK4 models

  • Material : Spring stainless steel with 0.125mm coating PEI powder sprayed then dipped in high quality heat resistant polymer based coating for power adhesion to the surface.

  • Properties: Flexible, removable, and holds to the magnetic sticker very well. High strength and heat resistance.

  • Quality: The flexible surface can easily be applied to all  Prusa MK3 and MK4 beds making it perfect for plug and play printing.

  • Use: Your prints in PLA, TPU, ABS, PETG adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. We strongly recommend you DO NOT print using ASA,STTPU,PLA FLEX, TPU Derivative, Polymaker Polysmooth PLA/PVB, PC or NYLON on this surface. 

  • High Temp compatible: Since we have used high quality spring steel of 0.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.

  • Compatible Printers : All Bambulab and TwoTrees printers where the Heated Bed plate measures 257.5 x 257.5 mm are compatible. Compatible with PLA/PETG/PET/ABS only.
    **Not Compatible with ASA,STTPU,PLA FLEX, Polysmooth PLA/PVB, Nylon and PC filament. PC or PCCF will permanently bond to the surface.

Notes :

  1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable. 
  2. Do not print ASA, Nylon, PC or PC CF or any PC blend filament on the surface. Nylon and PC will permanently fuse with the build surface rendering it useless for any further prints. 
  3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate. 
  4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal. 

$37.99 $49.99

SLICEWORX

3D Printer Accessories

93 In Stock

SLICEWORX Flex Dipped Plate Textured Spring Steel Sheet 254x235mm for Prusa MK3/MK4 Printers 3D Printer

  • Versatile: Product is compatible with Prusa MK3/MK4 models

  • Material : Spring stainless steel with 0.125mm coating PEI powder sprayed then dipped in high quality heat resistant polymer based coating for power adhesion to the surface.

  • Properties: Flexible, removable, and holds to the magnetic sticker very well. High strength and heat resistance.

  • Quality: The flexible surface can easily be applied to all  Prusa MK3 and MK4 beds making it perfect for plug and play printing.

  • Use: Your prints in PLA, TPU, ABS, PETG adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. We strongly recommend you DO NOT print using ASA,STTPU,PLA FLEX, TPU Derivative, Polymaker Polysmooth PLA/PVB, PC or NYLON on this surface. 

  • High Temp compatible: Since we have used high quality spring steel of 0.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.

  • Compatible Printers : All Bambulab and TwoTrees printers where the Heated Bed plate measures 257.5 x 257.5 mm are compatible. Compatible with PLA/PETG/PET/ABS only.
    **Not Compatible with ASA,STTPU,PLA FLEX, Polysmooth PLA/PVB, Nylon and PC filament. PC or PCCF will permanently bond to the surface.

Notes :

  1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable. 
  2. Do not print ASA, Nylon, PC or PC CF or any PC blend filament on the surface. Nylon and PC will permanently fuse with the build surface rendering it useless for any further prints. 
  3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate. 
  4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal. 

Related Products