SLICEWORX Flex Dipped Plate Textured Spring Steel Sheet 172.5×162mm for Sovol Zero 3D PRINTER

• Versatile: Product is plug and play compatible with Sovol Zero 3D Printer

• N-E-O COATING: Our Nex-gen Epoxy Overlay (NEO) makes sure even your toughest prints stay down on the bed. 
  

• Material : Spring stainless steel with 0.125mm coating powder sprayed then dipped in high quality heat resistant epoxy based NEO coating for power adhesion to the surface.
  

• Properties: Flexible, removable, and holds to the original magnetic sticker very well. High strength and heat resistance.
  
  
• Quality: The flexible surface can easily be applied to Bambulab H2D 3D PRINTER bed making it perfect for plug and play printing.
  
  
• Use: Your prints in PLA, ABS, PETG,PC, ASA adhere to the printing surface readily, easy to remove the prints, flex slightly to pop your print right off. For PC, ABS,ASA  we recommend using PVA glue as release agent. We strongly recommend you DO NOT print using  TPU,STTPU,PLA FLEX, TPU Derivative, Polymaker Polysmooth PLA/PVB or NYLON on this surface. 
  
  
• High Temp compatible: Since we have used high quality spring steel of 0.5mm it can withstand thousands of heat cycles that a 3D print bed goes through from print to print without losing coating properties.
  
  
• Compatible Printers : All 3D printers where the Heated Bed plate measures

  172.5×162mm are compatible. Compatible with PLA/PETG/ASA/ABS only.

  **Not Compatible with  TPU,STTPU,PLA FLEX, Polysmooth PLA/PVB, Nylon Filament

Notes :

1. Use only water to clean the build surface. No detergent or solvents are needed. Strictly do not use IPA, Alcohol or Acetone to clean the surface. This will destroy the coating and properties and the plate may be rendered unusable. 
2. Do not print TPU,STTPU, Nylon  filament on the surface. Nylon will permanently fuse with the build surface rendering it useless for any further prints. 
3. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate. 
4. Keep the build plate clean with a damp cloth to prevent grease build up from touching and handling the plate during part removal. 
5. Magnetic Sticker is not included in this product listing.